Xorg.0.log - XO Ramspeed Test Memory
X.Org X Server 1.9.5
Release Date: 2011-03-17
X Protocol Version 11, Revision 0
Build Operating System: x86-01 2.6.32-71.14.1.el6.x86_64
Current Operating System: Linux xo-72-a7-da.localdomain 2.6.35.13_xo1.5-20111026.1209.olpc.5d76efb #1 PREEMPT Wed Oct 26 12:12:22 EDT 2011 i686
Kernel command line: video=viafb:viafb_mode=1200x900,viafb_bpp=24,viafb_active_dev=LCD,viafb_lcd_panel_id=23 no_console_suspend reboot=acpi selinux=0 console=ttyS0,115200 console=tty0 fbcon=font:SUN12x22
Build Date: 18 March 2011 12:23:01AM
Build ID: xorg-x11-server 1.9.5-1.fc14
Current version of pixman: 0.18.4
Before reporting problems, check
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu May 24 17:10:53 2012
(==) Using config directory: "/etc/X11/xorg.conf.d"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(==) No Layout section. Using the first Screen section.
(==) No screen section available. Using defaults.
(**) |-->Screen "Default Screen Section" (0)
(**) | |-->Monitor ""
(==) No device specified for screen "Default Screen Section".
Using the first device section listed.
(**) | |-->Device "Configured Video Device"
(==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
(**) Option "DontZap" "true"
(**) Option "BlankTime" "0"
(**) Option "StandbyTime" "0"
(**) Option "SuspendTime" "0"
(**) Option "OffTime" "0"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) FontPath set to:
catalogue:/etc/X11/fontpath.d,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(**) Extension "DPMS" is disabled
(II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
(II)
***************************************************************
***************************************************************
** Fedora switched to udev-based device detection with **
** xorg-x11-server-1.7.99.901-1. Custom HAL configuration **
** stored in /etc/hal/fdi/policy will not be seen by this **
** server version. If you have such configuration you will **
** need to update it to the new format. **
** For more information, see the Fedora wiki page **
** **
***************************************************************
***************************************************************
(II) Loader magic: 0x822a0c0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 8.0
X.Org XInput driver : 11.0
X.Org Server Extension : 4.0
(--) PCI:*(0:0:1:0) 1106:5122:152d:0833 rev 0, Mem @ 0xd0000000/67108864, 0xf0000000/16777216, BIOS @ 0x????????/65536
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.9.5, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 4.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.9.5, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 4.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.9.5, module version = 1.0.0
ABI class: X.Org Server Extension, version 4.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.9.5, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 4.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.9.5, module version = 1.0.0
ABI class: X.Org Server Extension, version 4.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.9.5, module version = 1.2.0
ABI class: X.Org Server Extension, version 4.0
(II) Loading extension DRI2
(II) LoadModule: "chrome"
(II) Loading /usr/lib/xorg/modules/drivers/chrome_drv.so
(II) Module chrome: vendor="X.Org Foundation"
compiled for 1.9.5, module version = 5.74.255
Module class: X.Org Video Driver
(II) chrome: driver for VIA chipsets: P4M800PRO, CX700, K8M890, P4M890,
P4M900, VX800, VX855, VX900, CN750
(++) using VT number 1
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.9.5, module version = 0.1.0
ABI class: X.Org Video Driver, version 8.0
(II) VIA(0): the driver module for this screen 0 is "chrome" driver.
(--) VIA(0): Chipset: "VX855"
(--) VIA(0): Chipset Rev.: 0
(II) VIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
(==) VIA(0): Depth 24, (--) framebuffer bpp 32
(==) VIA(0): RGB weight 888
(==) VIA(0): Default visual is TrueColor
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules/libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.9.5, module version = 1.0.0
ABI class: X.Org Video Driver, version 8.0
(WW) System lacks support for changing MTRRs
(EE) VIA(0): V_BIOS address 0x74040 out of range
(II) VIA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) Loading sub module "vt1625"
(II) LoadModule: "vt1625"
(WW) Warning, couldn't open module vt1625
(II) UnloadModule: "vt1625"
(II) Loading sub module "ViaIntegratedTV"
(II) LoadModule: "ViaIntegratedTV"
(WW) Warning, couldn't open module ViaIntegratedTV
(II) UnloadModule: "ViaIntegratedTV"
(II) Loading sub module "ad9389"
(II) LoadModule: "ad9389"
(WW) Warning, couldn't open module ad9389
(II) UnloadModule: "ad9389"
(II) Loading sub module "sil164"
(II) LoadModule: "sil164"
(WW) Warning, couldn't open module sil164
(II) UnloadModule: "sil164"
(==) VIA(0): Using gamma correction (1.0, 1.0, 1.0)
(--) VIA(0): videoram = 65536k
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) VIA(0): I2C bus "I2C bus 1" initialized.
(II) VIA(0): I2C bus "I2C bus 2" initialized.
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.9.5, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib/xorg/modules/libexa.so
(II) Module exa: vendor="X.Org Foundation"
compiled for 1.9.5, module version = 2.5.0
ABI class: X.Org Video Driver, version 8.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) VIA(0): Output CRT has no monitor section
(II) VIA(0): Output DVI has no monitor section
(II) VIA(0): Output LCD using monitor section LCD
(**) VIA(0): Option "DIPort" "DFP_HIGHLOW,DVP1"
(**) VIA(0): Option "PanelSize" "1200x900"
(II) VIA(0): Output TV has no monitor section
(II) VIA(0): Output HDMI has no monitor section
(II) VIA(0): Output DP has no monitor section
(II) VIA(0): Output DP-2 has no monitor section
(II) VIA(0): Output LCD-2 has no monitor section
(II) VIA(0): Output CRT-2 has no monitor section
(II) VIA(0): EDID for output CRT
(II) VIA(0): Printing probed modes for output LCD
(II) VIA(0): Modeline "1200x900"x49.7 57.27 1200 1211 1243 1264 900 901 911 912 (45.3 kHz)
(II) VIA(0): Output CRT disconnected
(II) VIA(0): Output LCD connected
(II) VIA(0): Using exact sizes for initial modes
(II) VIA(0): Output LCD using initial mode 1200x900 +0+0
(II) VIA(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
(==) VIA(0): DPI set to (96, 96)
(--) Depth 24 pixmap format is 32 bpp
(II) VIA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) VIA(0): [drm] Detect H6 chipset: 0007 chipid: 5122
drmOpenDevice: node name is /dev/dri/card0
[drm] failed to load kernel module "chrome"
(EE) VIA(0): DRM open error
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: node name is /dev/dri/card0
[drm] failed to load kernel module "chrome"
(EE) [drm] drmOpen failed.
(EE) VIA(0): [dri] DRIScreenInit failed. Disabling DRI.
(II) VIA(0): H6 3D Engine has been initialized.
(II) VIA(0): VIAInternalScreenInit
DEBUG: maxPitchBytes 16383
(II) EXA(0): Offscreen pixmap area of 50789344 bytes
(II) EXA(0): Driver registered support for the following operations:
(II) Solid
(II) Copy
(II) Composite (RENDER acceleration)
(II) VIA(0): Enable EXA Now
(II) VIA(0): [EXA] Trying to enable EXA acceleration.
(==) VIA(0): Backing store disabled
(==) VIA(0): Silken mouse enabled
(II) VIA(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(==) VIA(0): DPMS enabled
(II) VIA(0): direct rendering disabled
(II) VIA(0): [Memory_layout] video managed Fb size = 1024 k
(II) VIA(0): IGA2 timing
HActive=1200, HSyncStart=1211, HSyncEnd=1243, HTotal=1264
VActive=900, VSyncStart=901, VSyncEnd=911, VTotal=912
(II) VIA(0): IGA1 timing
HActive=800, HSyncStart=840, HSyncEnd=968, HTotal=1056
VActive=600, VSyncStart=601, VSyncEnd=605, VTotal=628
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) SELinux: Disabled on system
(II) AIGLX: Screen 0 is not DRI2 capable
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) VIA(0): Setting screen physical size to 152 x 114
(II) config/udev: Adding input device Power Button (/dev/input/event2)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: Applying InputClass "system-setup-keyboard"
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.8.99.905, module version = 2.5.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 11.0
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event2"
(--) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp,"
(II) config/udev: Adding input device Lid Switch (/dev/input/event1)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device EBook Switch (/dev/input/event3)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
(**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
(**) AT Translated Set 2 keyboard: Applying InputClass "system-setup-keyboard"
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event4"
(--) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp,"
(II) config/udev: Adding input device FSPPS/2 Sentelic FingerSensingPad (/dev/input/event5)
(**) FSPPS/2 Sentelic FingerSensingPad: Applying InputClass "evdev pointer catchall"
(**) FSPPS/2 Sentelic FingerSensingPad: Applying InputClass "evdev emulate 3 buttons"
(**) FSPPS/2 Sentelic FingerSensingPad: always reports core events
(**) FSPPS/2 Sentelic FingerSensingPad: Device: "/dev/input/event5"
(--) FSPPS/2 Sentelic FingerSensingPad: Found 11 mouse buttons
(--) FSPPS/2 Sentelic FingerSensingPad: Found scroll wheel(s)
(--) FSPPS/2 Sentelic FingerSensingPad: Found relative axes
(--) FSPPS/2 Sentelic FingerSensingPad: Found x and y relative axes
(II) FSPPS/2 Sentelic FingerSensingPad: Configuring as mouse
(**) Option "Emulate3Buttons" "true"
(**) FSPPS/2 Sentelic FingerSensingPad: YAxisMapping: buttons 4 and 5
(**) FSPPS/2 Sentelic FingerSensingPad: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "FSPPS/2 Sentelic FingerSensingPad" (type: MOUSE)
(**) FSPPS/2 Sentelic FingerSensingPad: (accel) keeping acceleration scheme 1
(**) FSPPS/2 Sentelic FingerSensingPad: (accel) acceleration profile 0
(**) FSPPS/2 Sentelic FingerSensingPad: (accel) acceleration factor: 2.000
(**) FSPPS/2 Sentelic FingerSensingPad: (accel) acceleration threshold: 4
(II) FSPPS/2 Sentelic FingerSensingPad: initialized for relative axes.
(II) config/udev: Adding input device FSPPS/2 Sentelic FingerSensingPad (/dev/input/mouse0)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device OLPC AC power jack (/dev/input/event0)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device olpc-kbdshim virtual input (/dev/input/event6)
(**) olpc-kbdshim virtual input: Applying InputClass "evdev pointer catchall"
(**) olpc-kbdshim virtual input: Applying InputClass "evdev keyboard catchall"
(**) olpc-kbdshim virtual input: Applying InputClass "evdev emulate 3 buttons"
(**) olpc-kbdshim virtual input: Applying InputClass "system-setup-keyboard"
(**) olpc-kbdshim virtual input: always reports core events
(**) olpc-kbdshim virtual input: Device: "/dev/input/event6"
(--) olpc-kbdshim virtual input: Found 3 mouse buttons
(--) olpc-kbdshim virtual input: Found scroll wheel(s)
(--) olpc-kbdshim virtual input: Found relative axes
(--) olpc-kbdshim virtual input: Found x and y relative axes
(--) olpc-kbdshim virtual input: Found keys
(II) olpc-kbdshim virtual input: Configuring as mouse
(II) olpc-kbdshim virtual input: Configuring as keyboard
(**) Option "Emulate3Buttons" "true"
(**) olpc-kbdshim virtual input: YAxisMapping: buttons 4 and 5
(**) olpc-kbdshim virtual input: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "olpc-kbdshim virtual input" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp,"
(**) olpc-kbdshim virtual input: (accel) keeping acceleration scheme 1
(**) olpc-kbdshim virtual input: (accel) acceleration profile 0
(**) olpc-kbdshim virtual input: (accel) acceleration factor: 2.000
(**) olpc-kbdshim virtual input: (accel) acceleration threshold: 4
(II) olpc-kbdshim virtual input: initialized for relative axes.
(II) config/udev: Adding input device olpc-kbdshim virtual input (/dev/input/mouse1)
(**) olpc-kbdshim virtual input: Applying InputClass "system-setup-keyboard"
(II) No input driver/identifier specified (ignoring)
(II) VIA(0): EDID for output CRT
(II) VIA(0): Printing probed modes for output LCD
(II) VIA(0): Modeline "1200x900"x49.7 57.27 1200 1211 1243 1264 900 901 911 912 (45.3 kHz)
(II) VIA(0): EDID for output CRT
(II) VIA(0): Printing probed modes for output LCD
(II) VIA(0): Modeline "1200x900"x49.7 57.27 1200 1211 1243 1264 900 901 911 912 (45.3 kHz)
(II) VIA(0): EDID for output CRT
(II) VIA(0): Printing probed modes for output LCD
(II) VIA(0): Modeline "1200x900"x49.7 57.27 1200 1211 1243 1264 900 901 911 912 (45.3 kHz)
(II) VIA(0): EDID for output CRT
(II) VIA(0): Printing probed modes for output LCD
(II) VIA(0): Modeline "1200x900"x49.7 57.27 1200 1211 1243 1264 900 901 911 912 (45.3 kHz)
DEBUG: Stalled LOOP: 10577
DEBUG: Stalled LOOP: 13
DEBUG: Stalled LOOP: 17512
DEBUG: Stalled LOOP: 16520
DEBUG: Stalled LOOP: 11
DEBUG: Stalled LOOP: 222
DEBUG: Stalled LOOP: 19
DEBUG: Stalled LOOP: 181
DEBUG: Stalled LOOP: 75
DEBUG: Stalled LOOP: 49
DEBUG: Stalled LOOP: 151
DEBUG: Stalled LOOP: 333
DEBUG: Stalled LOOP: 107
DEBUG: Stalled LOOP: 140
DEBUG: Stalled LOOP: 157
DEBUG: Stalled LOOP: 322
DEBUG: Stalled LOOP: 145
(II) VIA(0): EDID for output CRT
(II) VIA(0): Printing probed modes for output LCD
(II) VIA(0): Modeline "1200x900"x49.7 57.27 1200 1211 1243 1264 900 901 911 912 (45.3 kHz)
DEBUG: Stalled LOOP: 11
DEBUG: Stalled LOOP: 169
DEBUG: Stalled LOOP: 83
DEBUG: Stalled LOOP: 325
DEBUG: Stalled LOOP: 144
DEBUG: Stalled LOOP: 45
(II) VIA(0): EDID for output CRT
(II) VIA(0): Printing probed modes for output LCD
(II) VIA(0): Modeline "1200x900"x49.7 57.27 1200 1211 1243 1264 900 901 911 912 (45.3 kHz)
DEBUG: Stalled LOOP: 548
(II) VIA(0): EDID for output CRT
(II) VIA(0): Printing probed modes for output LCD
(II) VIA(0): Modeline "1200x900"x49.7 57.27 1200 1211 1243 1264 900 901 911 912 (45.3 kHz)
(II) VIA(0): EDID for output CRT
(II) VIA(0): Printing probed modes for output LCD
(II) VIA(0): Modeline "1200x900"x49.7 57.27 1200 1211 1243 1264 900 901 911 912 (45.3 kHz)
(II) VIA(0): EDID for output CRT
(II) VIA(0): Printing probed modes for output LCD
(II) VIA(0): Modeline "1200x900"x49.7 57.27 1200 1211 1243 1264 900 901 911 912 (45.3 kHz)
(II) VIA(0): EDID for output CRT
(II) VIA(0): Printing probed modes for output LCD
(II) VIA(0): Modeline "1200x900"x49.7 57.27 1200 1211 1243 1264 900 901 911 912 (45.3 kHz)
(II) VIA(0): EDID for output CRT
(II) VIA(0): Printing probed modes for output LCD
(II) VIA(0): Modeline "1200x900"x49.7 57.27 1200 1211 1243 1264 900 901 911 912 (45.3 kHz)
(II) VIA(0): EDID for output CRT
(II) VIA(0): Printing probed modes for output LCD
(II) VIA(0): Modeline "1200x900"x49.7 57.27 1200 1211 1243 1264 900 901 911 912 (45.3 kHz)
(II) VIA(0): EDID for output CRT
(II) VIA(0): Printing probed modes for output LCD
(II) VIA(0): Modeline "1200x900"x49.7 57.27 1200 1211 1243 1264 900 901 911 912 (45.3 kHz)
(II) VIA(0): EDID for output CRT
(II) VIA(0): Printing probed modes for output LCD
(II) VIA(0): Modeline "1200x900"x49.7 57.27 1200 1211 1243 1264 900 901 911 912 (45.3 kHz)
(II) VIA(0): EDID for output CRT
(II) VIA(0): Printing probed modes for output LCD
(II) VIA(0): Modeline "1200x900"x49.7 57.27 1200 1211 1243 1264 900 901 911 912 (45.3 kHz)
(II) VIA(0): EDID for output CRT
(II) VIA(0): Printing probed modes for output LCD
(II) VIA(0): Modeline "1200x900"x49.7 57.27 1200 1211 1243 1264 900 901 911 912 (45.3 kHz)
(II) VIA(0): EDID for output CRT
(II) VIA(0): Printing probed modes for output LCD
(II) VIA(0): Modeline "1200x900"x49.7 57.27 1200 1211 1243 1264 900 901 911 912 (45.3 kHz)
(II) VIA(0): EDID for output CRT
(II) VIA(0): Printing probed modes for output LCD
(II) VIA(0): Modeline "1200x900"x49.7 57.27 1200 1211 1243 1264 900 901 911 912 (45.3 kHz)
(II) VIA(0): EDID for output CRT
(II) VIA(0): Printing probed modes for output LCD
(II) VIA(0): Modeline "1200x900"x49.7 57.27 1200 1211 1243 1264 900 901 911 912 (45.3 kHz)
(II) VIA(0): EDID for output CRT
(II) VIA(0): Printing probed modes for output LCD
(II) VIA(0): Modeline "1200x900"x49.7 57.27 1200 1211 1243 1264 900 901 911 912 (45.3 kHz)
(II) VIA(0): EDID for output CRT
(II) VIA(0): Printing probed modes for output LCD
(II) VIA(0): Modeline "1200x900"x49.7 57.27 1200 1211 1243 1264 900 901 911 912 (45.3 kHz)
(II) VIA(0): EDID for output CRT
(II) VIA(0): Printing probed modes for output LCD
(II) VIA(0): Modeline "1200x900"x49.7 57.27 1200 1211 1243 1264 900 901 911 912 (45.3 kHz)
(II) VIA(0): EDID for output CRT
(II) VIA(0): Printing probed modes for output LCD
(II) VIA(0): Modeline "1200x900"x49.7 57.27 1200 1211 1243 1264 900 901 911 912 (45.3 kHz)
DEBUG: Stalled LOOP: 776
(II) VIA(0): EDID for output CRT
(II) VIA(0): Printing probed modes for output LCD
(II) VIA(0): Modeline "1200x900"x49.7 57.27 1200 1211 1243 1264 900 901 911 912 (45.3 kHz)
(II) VIA(0): EDID for output CRT
(II) VIA(0): Printing probed modes for output LCD
(II) VIA(0): Modeline "1200x900"x49.7 57.27 1200 1211 1243 1264 900 901 911 912 (45.3 kHz)
DEBUG: Stalled LOOP: 856
DEBUG: Stalled LOOP: 793
DEBUG: Stalled LOOP: 704
DEBUG: Stalled LOOP: 784
DEBUG: Stalled LOOP: 794
DEBUG: Stalled LOOP: 784
DEBUG: Stalled LOOP: 679
DEBUG: Stalled LOOP: 808
(II) VIA(0): EDID for output CRT
(II) VIA(0): Printing probed modes for output LCD
(II) VIA(0): Modeline "1200x900"x49.7 57.27 1200 1211 1243 1264 900 901 911 912 (45.3 kHz)
(II) VIA(0): EDID for output CRT
(II) VIA(0): Printing probed modes for output LCD
(II) VIA(0): Modeline "1200x900"x49.7 57.27 1200 1211 1243 1264 900 901 911 912 (45.3 kHz)
(II) VIA(0): EDID for output CRT
(II) VIA(0): Printing probed modes for output LCD
(II) VIA(0): Modeline "1200x900"x49.7 57.27 1200 1211 1243 1264 900 901 911 912 (45.3 kHz)
(II) VIA(0): EDID for output CRT
(II) VIA(0): Printing probed modes for output LCD
(II) VIA(0): Modeline "1200x900"x49.7 57.27 1200 1211 1243 1264 900 901 911 912 (45.3 kHz)
(II) VIA(0): EDID for output CRT
(II) VIA(0): Printing probed modes for output LCD
(II) VIA(0): Modeline "1200x900"x49.7 57.27 1200 1211 1243 1264 900 901 911 912 (45.3 kHz)
(II) VIA(0): EDID for output CRT
(II) VIA(0): Printing probed modes for output LCD
(II) VIA(0): Modeline "1200x900"x49.7 57.27 1200 1211 1243 1264 900 901 911 912 (45.3 kHz)
DEBUG: Stalled LOOP: 450